BYU ECEn 220

Using Vivado During Spring 2020 - [Option #5: Vivado on a Linux Virtual Machine]

nelson — 2020-09-02T17:06:55-06:00

Using Vivado During Spring 2020 You will use the Xilinx Vivado design software to design digital circuits and then test those designs on the circuit board. This is a very large, commercial software package that is being provided free of charge for your use. Options for using this to complete the labs include the following (sorted from most preferable to least preferable).

ta_schedule

jarom — 2020-06-15T17:03:49-06:00

TA HOURS WILL BE HELD ON ZOOM, NOT IN THE LAB If you see the “ Lucy” next to an entry below, it means the Zoom meeting is going - so please join! Scheduled Class Lab Hours Zoom Link: Ben Fogg TA Hours: Ammon Wolfert TA Hours: Jarom Harris TA Hours

labs:tb_rx.sv

nelson — 2020-06-11T19:03:08-06:00

labs:lab_11:tb_tx.sv

nelson — 2020-06-11T18:59:54-06:00

Codebreaker_serial - [Exercise #1 - Draw a message on the screen]

nelson — 2020-06-11T10:18:04-06:00

Codebreaker_serial Overview In this lab you will be given a secret message that has been encrypted with a secret key. You will create a circuit that tries every possible key until you find out which key successfully decrypts the message. Your design will start searching for the key after the center button is pressed. The current key being tried is displayed on the LEDs, and your stopwatch from a previous lab is used to time how long it takes for you to find the correct key. Once you have d…

Sp20 UART Receiver - [Exercise #3 - Test It in hardware]

nelson — 2020-06-10T17:08:03-06:00

Sp20 UART Receiver In this laboratory you will create and test the receiver part of a UART. Your design will closely follow the serial transmitter you previously did. That is, you will have handshaking with a host (but the signals are called Receive and Received). And, the receiver has similar components - a state machine, a bit counter, and a timer.

The CharDrawer_serial Module

nelson — 2020-06-08T10:55:26-06:00

The CharDrawer_serial Module This module is used to draw strings of characters to the serial output port, one character at a time. The module accepts only upper case characters (A-Z), digits (0-9) and space (“ ”). A null character (0) will not be drawn, and all other

labs:codebreaker_serial_top.sv - created

nelson — 2020-06-04T15:09:56-06:00

tutorials:tx_top.bit - created

nelson — 2020-06-02T09:13:17-06:00

labs:lab_4:lab4top.png - created

nelson — 2020-05-11T12:23:25-06:00

labs:lab4top.png - created

nelson — 2020-05-11T12:22:58-06:00

labs:adept.pdf - created

nelson — 2020-04-28T22:15:34-06:00

adept.png - created

nelson — 2020-04-28T20:18:07-06:00

labs:lab_0:lab1_outline.pdf - created

nelson — 2020-04-28T14:13:07-06:00

labs:lab_4:img_0072.jpg - created

nelson — 2020-04-22T14:09:45-06:00

labs:lab_4:img_0071.jpg - created

nelson — 2020-04-22T14:05:20-06:00

labs:lab_3:vivadocreatemodule3.pdf - created

nelson — 2020-04-20T13:29:12-06:00

labs:lab_3:vivadocreatemodule2.pdf - created

nelson — 2020-04-20T13:26:47-06:00

labs:lab_3:vivadocreatemodule1.pdf - created

nelson — 2020-04-20T13:24:11-06:00

labs:lab_1:usbconnector.pdf - created

nelson — 2020-04-20T12:39:29-06:00

labs:lab_1:nexsysboard.pdf - created

nelson — 2020-04-20T12:11:31-06:00

labs:lab_1:vivadohardwaremanager2.pdf - created

nelson — 2020-04-20T11:47:17-06:00

labs:lab_1:vivadohardwaremanager1.pdf

nelson — 2020-04-20T11:42:59-06:00

labs:lab_1:vivadostartup1.pdf

nelson — 2020-04-20T11:36:57-06:00

labs:vivadostartup1.pdf - created

nelson — 2020-04-20T11:35:58-06:00

keka1.pdf - created

nelson — 2020-04-14T09:55:58-06:00

xilinxinstall4.pdf - created

nelson — 2020-04-14T09:17:26-06:00

vminstall2.pdf - created

nelson — 2020-04-14T09:12:35-06:00

vminstall1.pdf

nelson — 2020-04-14T09:03:12-06:00

xilinxinstall1.pdf - created

nelson — 2020-04-14T08:55:17-06:00

xilinxinstall3.pdf

nelson — 2020-04-14T08:51:43-06:00

labs:lab_11:img_0065.jpg - created

nelson — 2020-04-13T11:19:45-06:00

labs:img_0065.jpg - created

nelson — 2020-04-13T11:19:19-06:00

labs:intro.mp4 - created

nelson — 2020-03-30T17:35:16-06:00

labs:tb_tx.sv

nelson — 2020-03-20T11:26:24-06:00

lucy-van-pelt-1-.jpg - created

nelson — 2020-03-19T14:07:10-06:00

labs:7seglab_0.png

nelson — 2020-02-10T10:44:31-06:00

labs:7seglab_0.pdf - created

nelson — 2020-02-10T10:36:05-06:00

tutorials:digital_lab_video.mp4 - created

nelson — 2020-02-03T16:21:46-06:00

labs:hwb.png - created

nelson — 2020-01-28T13:08:34-06:00

labs:simpleschem.png

nelson — 2020-01-28T13:06:41-06:00

labs:hwb.pdf - created

nelson — 2020-01-28T12:50:38-06:00

labs:simpleschem.pdf - created

nelson — 2020-01-28T12:47:31-06:00

labs:lab_pong:pong_sm.png

jgoeders — 2019-12-03T15:33:41-06:00

labs:uart_tx:uart_tx_sm.png - created

jgoeders — 2019-11-11T17:42:45-06:00

labs:lab_pong:top_pong.sv

jgoeders — 2019-11-11T12:38:55-06:00

labs:lab_pong:pong_system_diagram.png

jgoeders — 2019-11-11T12:31:30-06:00