User Tools
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
tutorials:vivado_project_setup [2020/05/07 12:49] nelson |
tutorials:vivado_project_setup [2020/05/07 12:51] (current) nelson [Project Configuration] |
||
|---|---|---|---|
| Line 8: | Line 8: | ||
| {{youtube>K0FBXq8DaZo?rel=0&noborder&1080x700}} | {{youtube>K0FBXq8DaZo?rel=0&noborder&1080x700}} | ||
| - | ** Clarifications to video steps:** | + | ** Clarifications to video steps for online courses:** |
| * You do not use the J: drive unless you are doing Option #3. Rather, you put the project on your local computer's disk. | * You do not use the J: drive unless you are doing Option #3. Rather, you put the project on your local computer's disk. | ||
| Line 31: | Line 31: | ||
| <color #ed1c24>After you have created your project, you should copy and paste the following commands and run them in the Tcl Console. You don't have to run them one at a time; you can copy the full set of commands, paste them in the Tcl Console and press Enter to run all of them. | <color #ed1c24>After you have created your project, you should copy and paste the following commands and run them in the Tcl Console. You don't have to run them one at a time; you can copy the full set of commands, paste them in the Tcl Console and press Enter to run all of them. | ||
| - | EACH TIME YOU CREATE A NEW PROJECT, YOU SHOULD PASTE AND RUN THESE COMMANDS.</color> | + | EACH TIME YOU CREATE A NEW PROJECT, YOU SHOULD PASTE AND RUN THESE COMMANDS. But, once you have done it for a new project, you don't have to ever do it again for that project. </color> |
| <file tcl> | <file tcl> | ||
