User Tools
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
tutorials:vivado_project_setup [2019/07/15 13:36] jgoeders [Creating a new Vivado Project] |
tutorials:vivado_project_setup [2020/05/07 12:51] (current) nelson [Project Configuration] |
||
|---|---|---|---|
| Line 6: | Line 6: | ||
| /*{{ :tutorials:creating_vivado_project.mp4 }} */ | /*{{ :tutorials:creating_vivado_project.mp4 }} */ | ||
| - | {{youtube>6jQm4zmJC7g?rel=0&noborder&1080x700}} | + | {{youtube>K0FBXq8DaZo?rel=0&noborder&1080x700}} |
| + | |||
| + | ** Clarifications to video steps for online courses:** | ||
| + | * You do not use the J: drive unless you are doing Option #3. Rather, you put the project on your local computer's disk. | ||
| Follow these steps to create a project: | Follow these steps to create a project: | ||
| Line 20: | Line 23: | ||
| * **Package**: csg324 | * **Package**: csg324 | ||
| * **Speed grade**: -1 | * **Speed grade**: -1 | ||
| - | * **Part Name**: xc7a100tcsg324-1 \\ {{:tutorials:vivado_setup:project_board_select.png?600 |}} \\ | + | * **Part Name**: xc7a100tcsg324-1 \\ {{ :tutorials:vivado_setup:project_board_select.png?nolink&600 |}}\\ |
| - Click **next**, then **finish**! | - Click **next**, then **finish**! | ||
| - | For future reference, the part name **xc7a100tcsg324-1** is also located in the sidebar and links to this tutorial. | + | /*For future reference, the part name **xc7a100tcsg324-1** is also located in the sidebar and links to this tutorial.*/ |
| =====Project Configuration===== | =====Project Configuration===== | ||
| - | <color #ed1c24>After you have created your project, you should copy and paste the following commands and run them in the Tcl Console. You don't have to run them one at a time; you can copy the full set of commands, paste them in the Tcl Console and press Enter to run all of them. EACH TIME YOU CREATE A NEW PROJECT, YOU SHOULD PASTE AND RUN THESE COMMANDS.</color> | + | <color #ed1c24>After you have created your project, you should copy and paste the following commands and run them in the Tcl Console. You don't have to run them one at a time; you can copy the full set of commands, paste them in the Tcl Console and press Enter to run all of them. |
| + | EACH TIME YOU CREATE A NEW PROJECT, YOU SHOULD PASTE AND RUN THESE COMMANDS. But, once you have done it for a new project, you don't have to ever do it again for that project. </color> | ||
| <file tcl> | <file tcl> | ||
| Line 37: | Line 41: | ||
| set_msg_config -new_severity "ERROR" -id "Synth 8-6858" | set_msg_config -new_severity "ERROR" -id "Synth 8-6858" | ||
| set_msg_config -new_severity "ERROR" -id "Synth 8-6859" | set_msg_config -new_severity "ERROR" -id "Synth 8-6859" | ||
| - | set_msg_config -new_severity "ERROR" -id "Timing 38-313" | + | set_msg_config -new_severity "WARNING" -id "Timing 38-313" |
| set_msg_config -new_severity "ERROR" -id "Timing 38-282" | set_msg_config -new_severity "ERROR" -id "Timing 38-282" | ||
| + | set_property INCREMENTAL false [get_filesets sim_1] | ||
| + | set_property -name {xsim.simulate.runtime} -value 100ns -objects [get_filesets sim_1] | ||
| </file> | </file> | ||
