User Tools
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
tutorials:vivado_project_setup [2019/07/10 14:54] jgoeders [Project Configuration] |
tutorials:vivado_project_setup [2020/05/07 12:51] (current) nelson [Project Configuration] |
||
|---|---|---|---|
| Line 4: | Line 4: | ||
| /* {{ :tutorials:vivado_setup:vivado_project_setup.mp4 }} */ | /* {{ :tutorials:vivado_setup:vivado_project_setup.mp4 }} */ | ||
| - | {{ :tutorials:creating_vivado_project.mp4 }} | + | /*{{ :tutorials:creating_vivado_project.mp4 }} */ |
| + | |||
| + | {{youtube>K0FBXq8DaZo?rel=0&noborder&1080x700}} | ||
| + | |||
| + | ** Clarifications to video steps for online courses:** | ||
| + | * You do not use the J: drive unless you are doing Option #3. Rather, you put the project on your local computer's disk. | ||
| Follow these steps to create a project: | Follow these steps to create a project: | ||
| - | - Open Vivado. There should be a shortcut for it on the desktop. \\ {{ tutorials:vivado_setup:vivado_shortcut.png?nolink |}} | + | - Open Vivado **2019.1**. There should be a shortcut for it on the desktop. |
| - Click **create new project**. Click **next**. | - Click **create new project**. Click **next**. | ||
| - Name your project after the lab that its for. | - Name your project after the lab that its for. | ||
| Line 18: | Line 23: | ||
| * **Package**: csg324 | * **Package**: csg324 | ||
| * **Speed grade**: -1 | * **Speed grade**: -1 | ||
| - | * **Part Name**: xc7a100tcsg324-1 \\ {{ tutorials:vivado_setup:project_board_select.png?nolink |}} | + | * **Part Name**: xc7a100tcsg324-1 \\ {{ :tutorials:vivado_setup:project_board_select.png?nolink&600 |}}\\ |
| - Click **next**, then **finish**! | - Click **next**, then **finish**! | ||
| - | For future reference, the part name **xc7a100tcsg324-1** is also located in the sidebar and links to this tutorial. | + | /*For future reference, the part name **xc7a100tcsg324-1** is also located in the sidebar and links to this tutorial.*/ |
| =====Project Configuration===== | =====Project Configuration===== | ||
| - | <color #ed1c24>After you have created your project, you should copy and paste the following commands and run them in the Tcl Console. You don't have to run them one at a time; you can copy the full set of commands, paste them in the Tcl Console and press Enter to run all of them. EACH TIME YOU CREATE A NEW PROJECT, YOU SHOULD PASTE AND RUN THESE COMMANDS.</color> | + | <color #ed1c24>After you have created your project, you should copy and paste the following commands and run them in the Tcl Console. You don't have to run them one at a time; you can copy the full set of commands, paste them in the Tcl Console and press Enter to run all of them. |
| + | EACH TIME YOU CREATE A NEW PROJECT, YOU SHOULD PASTE AND RUN THESE COMMANDS. But, once you have done it for a new project, you don't have to ever do it again for that project. </color> | ||
| <file tcl> | <file tcl> | ||
| Line 32: | Line 38: | ||
| set_msg_config -new_severity "ERROR" -id "Synth 8-3352" | set_msg_config -new_severity "ERROR" -id "Synth 8-3352" | ||
| set_msg_config -new_severity "ERROR" -id "Synth 8-5559" | set_msg_config -new_severity "ERROR" -id "Synth 8-5559" | ||
| + | set_msg_config -new_severity "ERROR" -id "Synth 8-6090" | ||
| set_msg_config -new_severity "ERROR" -id "Synth 8-6858" | set_msg_config -new_severity "ERROR" -id "Synth 8-6858" | ||
| set_msg_config -new_severity "ERROR" -id "Synth 8-6859" | set_msg_config -new_severity "ERROR" -id "Synth 8-6859" | ||
| - | set_msg_config -new_severity "ERROR" -id "Timing 38-313" | + | set_msg_config -new_severity "WARNING" -id "Timing 38-313" |
| set_msg_config -new_severity "ERROR" -id "Timing 38-282" | set_msg_config -new_severity "ERROR" -id "Timing 38-282" | ||
| + | set_property INCREMENTAL false [get_filesets sim_1] | ||
| + | set_property -name {xsim.simulate.runtime} -value 100ns -objects [get_filesets sim_1] | ||
| </file> | </file> | ||
